SCM T160 VANGUARD

Electronic spindle moulder tiltable +/-45° with electrospindle and quick tool change HSK B63,CE standards
machine withdrawn not working, with electronic board on machine panel to be replaced.

Features:
– worktop size with “LL” extensions 2500×750 mm
– tool holder shaft inclination + 45 -45 degrees
– useful height of the tool holder shaft 140 mm
– maximum tool diameter with profiling guide 250 mm
– diam. maximum tool retractable under the work surface with shaft in vertical position 300×75 mm
– suction hood on the guide diameter 120 mm
– suction hood on the base diameter 150 mm
– minimum operating pneumatic pressure 6 bar
– inverter for speed change, by selection from the control panel from 900 to 10,000 rpm
– electrospindle power KW7.5 – HP10 – Hz50

Standard equipment:
– Electronic control with Windows operating system, Pentium CPU, 12″ color flat screen with direct control actions with touch screen system, on pendant control panel.
– Direct management of the following work axes (7+1) with manual, semi-automatic, automatic, incremental method:
* vertical movement of the tool holder shaft
* movement of the inclination of the tool holder shaft
* movement of the entire guide in relation to the tool diameter
* movement of the entry plane on the guide in relation to the desired removal
* movement of the “Fast” sector plane
* vertical movement of the support for the driver in relation to the thickness of the piece to be machined
* horizontal movement of the support for the driver in relation to the diameter of the tool
* programming of the rotation speeds of the tool associated with the profile
* Automatic calibration
* Possibility of storing up to 999 programs of the managed axes
– Electrospindle with maximum available power from 3000 rpm:
* Liquid cooling system by forced circuit
* Pneumatic quick change system of the tool holder shaft with HSK B 63 cone attachment
* Double system of air blower to keep the contact surfaces clean, both in the cone and on the plane, obtaining the maximum coupling precision
* Safety sensors during the tool change phases, spindle rotation stop control, tool holder cone lock/unlock control
– Vertical movement of the entire shaft group on double precision linear guides by means of preloaded ball recirculation slides
– Tilting with dovetail guide with circular arc on cast iron and movement with transmission by means of ball recirculation screw (patented).
– Pendant control panel
– Profiling guide with total excursion with respect to the tool holder shaft of 205 mm on double linear guides, by means of ball recirculation slides.
– The FLEX system makes the spindle moulder guide easily removable from the table
– Possibility of working with tools from under the table using shafts with collets and ring nut for fixing the tool at the head of the shaft
– The support for the feeder allows the feeder to be completely removed from the work table
– Reversal of rotation of the spindle moulder with electrical interlock for starting
– Safety micro-switch on the engine compartment access door
– Electronic spindle brake with guaranteed stop even in the absence of mains voltage
– Emergency button, lockable main switch, magnetothermal protection
– Automatic engine start-up
– Transformer for 110V auxiliary circuit