SCM SUPERSET XL

4-SIDED MOULDER WITH 6 TOOL HOLDERS
MACHINING CAPABILITIES:
- Finished wood machining capacities Ep.xWidth. : 6 to 120 x 25 to 240mm
- Minimum individual part machining length: 450 mm
- Quick adjustment table and entry guide: 10 mm
- Feed rate: 5 to 25 m/min
- Profiling capability on the 2nd lower horizontal shaft with tool Ø 200: 15 mm
- Shaft rotation: 6000 rpm

COMPOSITION OF THE SCM SUPERSET XL MOULDER:
- Sturdy cast iron frame
- Control desk
- Entrance table, length: 2500 mm
Floor height: 910mm
Spring entry side presser
- 1/ Lower horizontal shaft (L: 250 mm)
- 2/ Straight top (L: 140 mm)
- 3/ Left Top (L: 140 mm)
- 4/ Upper horizontal shaft (L: 250 mm)
- 5/ Lower horizontal profiling shaft (L: 250 mm)
- 6/ 360° universal shaft (L: 240 mm)

Options to the advancement system installed:
- Short piece driving device
- Pneumatic exclusion from the table for feed group placed before the planer shaft
- Tandem advancement group with rapid exclusion in front of the right vertical group
- Tandem advancement group with rapid exclusion in front of the universal group
- Drive wheel flanged in correspondence of the left vertical group with manual horizontal movement
- Additional vertical roller presser

Other options:
- Two-sector presser shoe placed after the horizontal shaft
- Vertical shoe presser to use the universal shaft from below
- Pump for the lubrication of the working table with manual actuation
- Manual centralized lubrication
- Internal illumination of the tilting protection

OTHER FEATURES:
- General power supply: 380 v. Three phase - 50 Hz
- Star-delta starting
- Total installed power: 47.2 kW IN 96 A
- Jointer motor 1: 7.5 kW
- Left spindle motor: 7.5 kW
- Right spindle motor: 7.5 kW
- Planer motor: 7.5 kW
- Jointer motor 2: 7.5 kW
- 4-position motor: 7.5 kW
- Raising / lowering motor: 0.55 KW
- Drive motor: 2.2 kW
- Drive notched rollers Ø 140 mm by gimbals
- Pneumatic pressure on the coaches
- Digital indicators on each setting
- Axial adjustment of the 2 vertical shafts: 0 to 80 mm
- Axial adjustment of the 3 horizontal shafts and plane: 0 to 45 mm
- Diameter of the tool-holder shafts: 40 mm.
- Min-max diameter of profiling tools: Ø 100-200 mm
- Min-max diameter of tools on planer shaft: Ø 120-140 mm
- Machine equipped with 4 tool holders with 4 resharpenable irons:
. vertical: Ø 120, length 2x130
. horizontal: Ø 120, length 2x240 mm.
- Electric raise & lower with precision manual finishing
- Suction: 4x Ø 120 mm & 1x Ø 150 mm
- CE marking
- Up & down emergency stop

Dimensions for transport: 4850 x 1650 x h. 1620mm
Weight: 2950 kg