SCM Stefani MD RM

Used industrial automatic edge banding machine
General features:
- Adjustable feed speed chain: 10-22 m/min
- Thickness of the strip edge: 0.3-15 mm
- Thickness of the roller edge: 0.3-3 mm
- Max. Feed speed with solid wood edges > 6 mm: 12 m/min
- Max. Roll diameter: 780 mm

Working units:
Pre-milling unit “RT-E”
- The unit for pre-milling the panel edge; this results in an optimum glue application surface and a perfect joint line.
- Two time-controlled high-frequency motors to prevent tear-outs.
- Motor power (each): 2.2 kW
- Cutter speed: 9,000 rpm

Gluing unit “VC-S4.1/QMS-P”
- For automatic gluing of roll and strip edges with hot melt adhesive on straight panels.

SGP glue container
- Enables a quick change of glue color and glue type.

Pre-melter for EVA glue QMS-P:
- Automatic glue feed with heated glue

2 interchangeable feed rollers:
- One needle roller for solid wood and one knurled roller for thin and plastic edges.

Pressure rollers:
- first driven roller with motor drive and clutch
- 3 rollers without drive, two of them conically offset against each other for perfect edge adhesion, and one cylindrical.

Snipping unit “K/SEL”
- For flush trimming the protruding edge at the front and rear (also for soft/postforming panels)
- 2 high-frequency motors
- Automatic independent inclination (front/rear) of the saw blades 0-15°

- Motor power (each): 0.35 kW
- Saw blade speed: 12,000 rpm
- Automatic saw blade swivel range: 0°-15°

For flush milling top and bottom:
- 2 high-frequency motors
- Manual tilting of the motors

- Motor power (each): 1 kW
- Milling cutter speed: 12,000 rpm
- Motor inclination: 0-25°

Rounding unit “Round SK”:
- Enables rounding of straight or shaped corners and flush routing of the top/bottom panel side.
- Max. Feed speed: 18 m/min for rounding corners and 22 m/min for flush trimming.

- Motor power: 0.55 kW
- Cutter speed: 12,000 rpm

Scraper unit “RAS/1000”
- Eliminates any processing marks left by the previous units from the edges.
- Max. Feed speed: 25 m/min

Buffing unit “SPN”:
- Two independent motors for cleaning and polishing the edges

Maestro active edge” control system:
- Maestro active is the new human-machine interface software common to all SCM technologies.

“eye-M” operating console with integrated PC:
- The color 21.5” LCD display in 16:9 format

Preparation for barcode reader

Non-stick agent spraying unit “AAR”
- Located in front of the joint trimming unit, prevents glue from sticking to the top and bottom of the workpiece and facilitates cleaning.
Complete with 2 sprayers and a storage container.

Sprayer for finishing the edge:
- positioned in front of the surface scraper and / or the brushing unit, enables better panel cleaning and polishing of the applied edge.

Top pressure with belt
Feeding aid for narrow workpieces
Preparation for workpiece return “fastback 21-25”

Motors with 4 kW power instead of 2.2 kW
- Motors with an output of 4 kW instead of 2.2 kW for RT/E pre-milling unit

“SGP” glue container with NC dosing instead of the standard container
- Enables automatic adjustment of the dosage depending on the glue/panel type and finishing quality, instead of manual adjustment.

Ceramic lamps with infrared rays
- To heat the edge of the panel before applying the glue.

MultiEdge” device for the RI/S flush milling unit
- For edges with different thicknesses; the installed tool enables the processing of 3 radius edges (e.g.) 1-2-3 mm and numerous thin edges.