SCM ME35

Edgebander
GENERAL FEATURES:
– control panel at the entrance to facilitate its use in all working conditions
– monobloc steel base to guarantee stability, rigidity and maintenance of settings
– upper steel presser with 2 offset lines of rubber pressure wheels
– manual removal of the presser with automatic positioning of the operating groups according
to the thickness of the panel
– digital indicator of the thickness of the selected panel
– panel transport made with a rail composed of pads covered with high-adhesion rubber
and an industrial chain with 3/4” links. The sliding of the pads is carried out on 2 steel guides,
one round and the other flat, which guarantee the linear transport of the piece and resistance to lateral loads. Manual lubrication of the shoes
– panel support rollers along the entire length of the machine
– dedicated suction of glue fumes
– protective cabin
– electrical system with new PLC with improved performance and 1 4-line display,
padlockable main switch and thermal relays, emergency button

TECHNICAL DATA :
– work table mm. 3000×525
– work table height [mm] 904
– thickness of rolled edges [mm] 0.4 ÷ 3
– thickness of strip edges [mm] fino a 5
– panel height min. ÷ max. [mm] 8 ÷ 50
– min. length/width of panels with rolled edge [mm] 190/110
– min. length butted panel only front [mm] 120
– feed speed [m/min] 7
– S1 drive motor power [kW] 0.55
– pneumatic system pressure [bar] 6.5
– suction hood (glue tank) diam. [mm] 60
– n. 2 suction hoods (trimming unit) diam. [mm] 60
– working temperature [°C] 20 ÷ 190

Glue tank group:
– S1 motor power [kW] 0.25
– glue capacity [kg] ~ 0.8

Finger group:
– S1 motor power [kW] 0.19
– Ø 125 mm Z20 finger blade
– blade rotation speed [rpm] 12,000

Trimmer group:
– upper and lower motor power S1 [kW] 2 x 0.35
– Ø 55.3 mm Z3 Widia cutters
– cutter rotation speed [rpm] 12,000
– rolling/rolling vertical/horizontal copiers