Schelling FH 6 430

Panel splitting saw Schelling with automatic delivery, rear-fed with lifting table, can be fed from the front as well.
For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc.

Draw data:
Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC
Operating system WINDOWS XP
PC with keyboard and mouse
TFT monitor 17"
Saw length 4300mm, automatic detection of the start of the plate
Saw width 4300mm
Machine accuracy straightness of the cut on cut length 3m +-0.1mm
Positioning accuracy measured at input +-0.1mm
Max diameter saw blade 460mm, spindle 30mm
Pre-scoring blade 200mm, spindle 20mm, motor operation is set from the operating console
Max panel height 120mm
Uprighter
Saw motor 27kw
Saw blade over table 135mm
Safety curtain
Air cushion table with 3 ball valve nozzles, Radial ventilator fan
2650x850mm
620x850mm
2650x2550mm
Pressure beam with automatic adjustment of pressure to cut length and package height
Package straightener before and after the pressure beam
Max package height 120mm (incl. sum of curvature and board thickness tolerance)
My package thickness when using the package straightener 3mm
Pusher max clamp opening (gripper) 133mm
Min-max force package straightener 400/2000N
Speed ​​saw cradle forward 6-150m/min
speed saw cradle back 150m/min
Forward feed speed (pusher) up to 25m/min (according to EWuropa EN1870-13) other countries 80m/min
Speed ​​feeding back up to 80m/min
Scissor lift table hydraulic lengthxwidth 4350x2550mm
Platform
Hydraulic unit
Standard version 1600mm lifting height
1.25/2.5m/min raising speed, 1.25/5m/min lowering speed
Maximum load 1200 kg/m2
Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm
Max stack weight 6500 kg
Max stack length 1060mm
Max stack lengthxwidth 3660x2500
Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm
Light curtain for personal protection
Roller conveyor driven for packages frequency-controlled input to lift table left 5600x2600mm max load 6500kg
Roller conveyor driven for packages frequency-controlled input to lifting table right 5600x2600mm max load 6500kg
Slots for forklift 2 pcs, center distance 900mm, slot width 400mm
2 positioning stops with roller for stack alignment
Light curtain (double beam) for personal protection
Roller table for infeed with pusher infeed depth 4300mm, free-running ployamid rollers
Angle stop at the rolling table
Two-lane infeed guide (beam length 7200mm) 2-sided hardened precision guides
rack and pinion drive, two-sided
Input carriage (pusher) gear rack servo drive, non-contact measuring system
Gripper, (scissor clamps) in pusher 12 pcs
Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0
Pusher 3 pcs for plate thicknesses greater than 6mm, material thinner than 6mm is fed manually
Package straightener 3 pcs for the longitudinal edge
Central cleaning system feed trough (pusher)
Protective grid 10 lpm
Compressed air 6-8 bar, approx. 1600l/min
Electricity 38 kw, 70 A. 3x400 volts, 50 Hz, control voltage 24 VDC
Extraction quantity 4000m/h, air speed 30m/s
Underpressure at chip hole 2000Pascal
Diameter connection sockets 80 (angle connection), 120 /pressure beam), 150 (sawdust channel)
Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm
Working height 970mm
Building height 2500mm
Input driven roller track left with recess for forklift 5500x2550mm
Input driven roller track right with recess for forklift 5500x2550mm