Sarong SAAS 15AP, Suppository Line

Description
FEATURES
Output:
up to 30,000 suppositories per hour (aluminium version)
up to 26,000 suppositories per hour (plastic version)
Hopper capacity: 80 litres
Hopper heating: by means of electrical resistance and water bath Material reels diameter:
standard 490 mm - optional 550 mm
Maximum width of film: 65 mm
Packaging materials:
Aluminium:
duplex (ALU/PE - ALU/thermowelding coating) triptex (PP/ALU/PE) - PP/ALU/thermowelding coating) Thickness o! aluminium foil: 70 to 100 microns

Plastic:
PVC, PVCIPE, PVC/ PVDCIPE and other thermowelding materials.
Thickness of plastic film: 100 to 150 microns Thermoregulating board lor temperatures contro! in the panel Cooling time: two stages 8 minutes - tour stages 16 minutes Minimum cooling temperature: 3°C
Suppository cooling unit power:
two stages: 4400 frig./hour with temperature at 3°C
tour stages: (with one stage heated or at room temperature) 6600 frig./hour - tour stages: 8800 frig./hour

Air consumption:
aluminium version max 80 NUmin. plastic version max. 120 NL/min. at working pressure of 5 kg/sq.cm.
Water consumption: 6 to 8 1/mìn.
optional: water closed circuit with central pumping station of 6000 frig./hr. (two-stage version) and of 11000 frig./hr. (tour-stage version)
Nominal power:
Aluminium version: 2 cooling stages 9 kW - 4 cooling stages 12 kW Plastic version: 2 stages 1 o kW - 4 stages 13 kW
Auxiliary input: 24 Vac - 24 Vdc .
Standard input voltage: 220-380 V, 3-phase, 50 Hz
other voltage ratings available on request

Length dimension inclusive of heat seat station distanced from batching
station 800 mm approx.
Height of strip from floor at runout: 960 mm
Weight: SMS/15-AP - two stage - 2300 kg
SMS/15-AP - four stage - 2800 kg

Measures: height 2240 mm x length 6970 mm x width 2040 mm