Sanyo MCO19AIC (UV) CO2 Incubator

Interior dimensions (W x D x H): 19.3″ x 20.6″ x 26.2″ (490 x 523 x 665 mm)
Exterior dimensions (W x D x H): 24.4″ x 27.9″ x 35.4″ (620 x 710 x 900 mm)
Volume: 6.0 cu.ft. (170 L)
Shelves: 15/chamber, 4 supplied standard; 17″ x 17″ (450 x 450 mm), 15.4 lbs (7 kg) capacity
New weight: 205 lbs (93 kg)
Temperature control range: +5C above ambient to 50C
Temperature control uniformity and deviation: +/-0.25C in 25C ambient, setting 37C
Airflow: vertical airflow, contrinuous with inner door closed
Interior humidity: 95%RH at 37C through evaporation via DHA heating system
Temperature and CO2 control: P.I.D. setpoint resolution 0.1 degree, 0.1%
Display: LED digital
Data acquisition: Automatic log function of termperature and CO2
Communications: Remote alarm contacts standard, optimal 4-20mA connection, optional PC interface
Exterior cabinet and door (material): Galvanized steel exterior, baked-on enamel finish
Interior and shelves: Copper-enriched stainless steel
Inner door: Tempered glass
Insulation: Rigid foam polyurethane
Outer door: Reversible, heated
Access port: Single opening with interior and exterior 30 mm non-VOC silicone stoppers
Energy, electrical, utilities: 310W
Maximum power consumption: 1061 BTU
Electrical: 115V, 60Hz with NEMA 5-15 Plug provided, requires NEMA 5-15R ground receptacle
CO2 gas connection: 4 to 6 mm inner diameter tubing
CO2 gas pressure: nominal 4.3 PSI from two-stage CO2 regulator