Salvagnini P2 PANEL BENDER
AMERICA North (USA-Canada-Mexico)
SALVAGNINI P2 PANEL BENDER
MFG:2008
All Tooling was inspected and found to be in good condition.
Processed .09" AL - cosmetic material.
Bend Length = 76"
Flange Height = 6.5"
Max Thickness = .098" MS .083" SS .126" AL
CLA-A Thickness = .079" MS .06" SS
CLA-A Length = 13" ea Total = 26.38"
CLA mover is working but the tooling is not on the machine - can be purchased
Under Power Running Production
Approx. 36,500 hours
PERformER+
PERformER+ Panel Bender
LI Lower bending blade
LS1 Upper bending blade
SiX Control system
JOB.CONSOLE.P4 Software for managing the production and the P4 system
CLA-A Auxiliary bending tool asymmetric command for positive bends
Operational characteristics
maximum length of incoming notched sheet:78.74"(2000 mm)
maximum width of incoming notched sheet:59.06"(1500 mm)
maximum diagonal of notched sheet:84.65"(2150 mm)
maximum bending length:76.77"(1950 mm)
maximum dimension of bends above work surface:6.496"(165 mm)
LI - Lower bending blade
Bending blade able to make positive bends up to +135 in a single step.
Maximum thickness of sheet metal with
UTS of 59.5 ksi (410 N/mm2) (+ 90)0.098"(2.50 mm)
UTS of 59.5 ksi (410 N/mm2) (+ 135)0.083"(2.10 mm)
UTS of 84.1 ksi (580 N/mm2) (+ 90)0.083"(2.10 mm)
UTS of 84.1 ksi (580 N/mm2) (+ 125)0.063"(1.60 mm)
UTS of 38.4 ksi (265 N/mm2) (+ 90)0.126"(3.20 mm)
UTS of 38.4 ksi (265 N/mm2) (+ 135)0.083"(2.10 mm)
Minimum thickness of sheet metal0.020"(0.50 mm)
LS1 - Upper bending blade
Bending blade with reduced front dimensions, able to make negative bends up to
-135 in a single step.
Maximum thickness of sheet metal with
UTS of 59.5 ksi (410 N/mm2) (- 90) 0.098" (2.50 mm)
UTS of 59.5 ksi (410 N/mm2) (- 135) 0.083" (2.10 mm)
UTS of 84.1 ksi (580 N/mm2) (- 90) 0.083" (2.10 mm)
UTS of 84.1 ksi (580 N/mm2) (- 125) 0.063" (1.60 mm)
UTS of 38.4 ksi (265 N/mm2) (- 90) 0.126" (3.20 mm)
UTS of 38.4 ksi (265 N/mm2) (- 135) 0.083" (2.10 mm)
Minimum thickness of sheet metal 0.020" (0.50 mm)