Sakurai MAESTRO MS-102AII

Maximum sheet size: 1050 x 750 mm
Minimum sheet size: 420 x 297 mm
Maximum printing size: 1050 x 730 mm
Sheet thickness: 0,075-0,8 mm

Feeder
• Automatic feeder with center separation, similar to that of an offset press.
Therefore, the handling of this feeder is easy for an operator who has experience in offset presses.
• Depending on the type of printing and the type of material, the feeding mode can be easily changed, from stream feeder to single sheet feeder.
Feed Board
• 6 belts of 38 mm. wide with a quick adjustment of pulleys and brushes that allow a stable feeding of the sheet.
Convertible push/pull side guides ensure a high level of registration at high speeds. The stainless-steel board protects delicate substrates like plastic film from scratches and static electricity.
• Includes a no-sheet sensor on the marker that makes the machine stop automatically when there is no sheet.
• Front and side guide sensor on the cylinder that facilitates the arrival of the sheet with precision.
Stop Cylinder
The vacuum cylinder (291 mm diameter with 1.2 mm diameter holes) determines the performance of the press.
Maestro 72A/102A models have +/- 0.01mm accuracy in their cylinder roundness.
This ensures stable printing even at high speeds.
Screen Frame Pneumatic Lock Clamp
• Through a simple switch operation, the air cylinder clamps fitted on the master iron frame fixes the screen-printing frame in position instantly and firmly.
Fine registering can be obtained with the micro-adjustment knob.
• X and Y + 10mm adjustment can be done through an adjusting handle.
• Master frame runs on linear bearings for stable operation and increased durability.
Blade
• The angle of the blade is adjustable in a range of 5-30 degrees.
• Adjusting the pressure of the blade up to 15 mm. by a manual handle.
• The pressure of the blade is controlled by a pneumatic cylinder.
Delivery Board
• Two wide mesh belts (de 280 mm. de ancho) make sure of the smooth and stable delivery of various kinds of substrates without rolling-in.
• Plate cleaning or squeegee/flo-coater mounting or dismantling becomes easier as the delivery board can be pushed down by 90 degrees.

Operations Panel
• The main engine is controlled by the inverter control system which helps an operator set a printing speed with ease.
• The printing speed is indicated on the digital panel.
• Settings are made on an LCD touch panel.
Platforms
Platforms on both the operation side and the gear side are standard.
INCLUDED OPTIONAL EQUIPMENT
Stream feeder
Mechanical double sheet detector ??2 antistatic bars
• TRUMAX COMBI UV CURATING UNIT AND HOT AIR.
• TRUMAX STACKER
• UNIT IN PRODUCTION