S&S Bavaria 2000 L

Frame press
With automatic pressing cycle + manual control
for corner connections tenon+slots and dowel connection/mortised tenon,
can be switched using a selector switch on the control cabinet.
With basic equipment for optional use of counter profiles if the sash is rebated on the loose part.
CE version
Basic machine in the strongest frame welded construction, with thick-walled special hollow profiles.
Guideways of the pressure beams for the press corners in a low-abrasion machined version.

Fast, smooth, manual width adjustment using ball-bearing carriage, fixing in 50 mm
hole grid, optional motorized width adjustment with hydraulic clamping (at an additional cost).

Height adjustment and pressing using long-stroke cylinders
in one work cycle. Right-hand press corners with integrated horizontal
cylinders, therefore no vertical positioning of the horizontal pressure
cylinders is necessary, which avoids cylinder collisions.
Lower support can be adjusted in several positions to the most suitable
insertion height. 3 KW compact hydraulic system with integrated control block,
variable pressure control from 20 - 120 bar, pressure gauge Control via touch
button with separate control circuits for the vertical and horizontal press
cylinders, mounted on a freely movable control panel. 2 vertical press
cylinders, double-acting, stroke adapted to
working height, piston diameter 60 mm
Pressure force per cylinder max. 2100 kg
2 horizontal press cylinders, double-acting,
80 mm stroke, piston diameter 40 mm
Pressure force per cylinder max. 1250 kg
Abutment and pressure plate depth 100 mm
Control cabinet on the machine base on the left, 400 volts, 50 Hz
Machine with ready-to-connect plug 16 A
Paint: RAL 7035 light gray with RAL 7016 anthracite gray
Working size: length x height = 4,500 mm x 2,750 mm
Note:
Actual working size: 4,500 x 3,000 mm (length x height)
Space required: 5,500 mm x 1,400 mm x 3,550 mm (LengthxWidthxHeight)