RUF Lignum Classic

Briquetting Systems
Former Test Lab machine with just under 144 hours of total use!
All briquetting systems of the RUF LIGNUM series process residual wood at a consistantly high level of quality and density – from dust to wood shavings and coarse chips.
The pressing pressure of all models is sufficient to press loose chips into solid briquettes.
No binders are required for this process.
It is important that the moisture content of the wood chips is below 15%, preferably under 12%, and that the chip size does not exceed 2in.
The general rule is that the finer the material is, the smoother and more solid the surface and edges turn out.
LIGNUM Classic The calculation basis is a weight of 2.0 lb/briquette, which results from the briquette form 6x2.4in, with a length of 3.5in and a density of 62 lb/ft3
RUF exclusively utilizes energy efficient class IE3 motors.
The hydraulic system creates a specific pressing force of more than 24,000 psi during the briquetting process
and thereby ensures a consistantly high briquette quality, even in continuous operation
Up to 900 lbs. / hr throughput capability
40HP, 3PH motor
Conveyor not included but could be quoted to meet your specific needs.