Reinhardt Slim Line SL 170 R2L

CNC-controlled cross-cutting machine
Went into production in 2022
SlimLine cross-cutting system - demonstration machine

INLET SIDE:
1 LOADING 3 BUFFER POSITIONS NOMINAL LENGTH 5000 -
5 CHAIN ​​STRANDS The operator places the workpieces independently of the machine's cycle.
The latches and the continuously adjustable end stop serve as alignment aids when placing the workpieces.
The unit can hold up to 3 workpieces (workpiece packages) while a 4th workpiece (workpiece package) can be in processing.
The unit passes the workpieces (workpiece packages) fully automatically to the cross-cut saw.
This results in continuous feeding and an increase in performance of up to 30% (practical value).
The feeder is equipped with a stable 3/4" chain.
Minimum workpiece raw length 600 mm (shorter workpieces are to be placed directly on the machine infeed table).
Buffer space for 3 workpieces or workpiece packages (2 automatic ratchet rows)

1 INFEED TABLE NOMINAL LENGTH 5000 R2L For automatic cutting of strips, boards and squared timber for individual and series production.
Automatic detection of the raw length placed on top. In order to make optimal
use of the saw's cutting area, the workpieces can also be processed stacked in small packages.
Permissible workpiece oversize 150 mm.
Safety technology: The working area of ​​the positioning slide is closed at the front and from the back by a protective fence.
On the operator side, all systems are equipped with a safety light curtain.
Up to 300 kg can be reliably positioned using a servo motor and the stable belt drive (100 mm wide).
1 CLAMPING DEVICE FOR SLIDES e.g. Recommended for processing planed goods.
Prevents the workpieces from slipping during the positioning process.

1 SLIM-LINE R2L Working direction from right to left
Solid construction and successfully in use for decades.
The SLIM-LINE can be individually expanded with an extensive range of accessories.
In order to make optimal use of the saw's cutting area, the workpieces can also be processed stacked in small packages.
- Extraction nozzle for chip extraction 2 * 125 mm
- Extraction speed approx. 30 m/s
- Extraction volume: approx. 2,650 cbm/h
- Cutting width: 20 - 350 mm with a cutting height of 110 mm
- Cutting width. 20 - 400 mm with a cutting height of 170 mm

1 LIFT MODULE 170 Cutting range:
- Wood thickness: 20-170mm
- Speed ​​2,800 rpm
- Cutting time per stroke 0.8
- 3 sec Standard equipment 62-001.01
- Automatic cut release
- Side pressure device for right-angled saw cuts
- Solid miter saw in a stable steel construction
- Saw blade feed infinitely adjustable
- Automatic protection and workpiece hold-down device
- Pneumatic saw stroke - Replaceable wear rails in the saw blade area
- Saw stroke cylinder with shock absorber for fast saw cuts
- Saw blade box lined with soundproofing mats as standard.
Easy saw blade change: The saw blade is changed from the front for an even more convenient and faster tool change.
All machines are equipped with the patented ProLock quick-clamping system.

MACHINE EQUIPMENT
1 MOTOR 11KW 400VD/690VY 50HZ 1 SAW BLADE 600*5.7/4.0*30 Z110 WZ20
REVERSE
1 SLIDING PROTECTION SIDE PUSHING R2L Suitable for pushing workpieces directly behind the saw blade.
The entire sawing area is encapsulated by a stable hood.
This protective hood is also equipped with a sliding protection.
If a crooked workpiece hits the protective hood during the positioning process, this sliding protection is unlocked.
To prevent damage to the sliding system or the protective hood, the system is switched off.

1 PRESSER OUTLET SWIVELLING R2L *11315-017 .1*
With the help of the additional side pressing device, which is located directly behind the saw blade
and presses the workpiece (package) against the feed rail, a precisely right-angled saw cut is achieved (standard cutting accuracy + / - 1.0 mm).

OUTLET SIDE *62-223.40* 1 CONVEYOR BELT 4.0M/370MM
The outfeed conveyor belt is equipped with pneumatic pushers.
Each section can be individually assigned to one of the pushers.
The good pieces are automatically ejected at the assigned position.
It can be determined whether the good parts are pushed off the pusher on the left or right.
They can also be pushed off in the middle.
In this way, separation can be carried out again at each pusher.

1 BASIC EQUIPMENT FOR SORTING

1 SHIFTER ON SAW BLADE L1500
All pieces are pushed across a storage table immediately after the saw cut has been made.
Different lengths can be easily identified as all sections are flush on one side.

1 SHIFTER STANDARD L1500/370 ASP 1 STORAGE TABLE ON SAW BLADE
(WITHOUT DRAWER BELT) R2L at the height of the 1st pusher on the saw blade