Reifenhauser BT 1000-2-63 K

Twin-screw extruder, conical
Operating hours: 32,303 hours
Screw geometry: conical for PVC-hard profiles
Screw diameter: 63 – 121 mm
Screw length: 1300 mm
Screw speed: max. approx. 32 1/min.
Nominal torque from gearbox: 1000 daNm
Dynamic load rating of the back pressure bearing: 103600 daN
Motor power: 43.0 kW,
Drive motor: Baumüller DC motor
Barrel heating/cooling zones: 4/3 (air cooling with fan)
Adapter heating zones: 1
Tool heating zones: 5
Temperature control: digital temperature controller (2 x PSG Multipact 88)
Max. permissible melt pressure: 500 bar
Output: approx. 150 – 200 kg/h for rigid PVC profiles
Accessories: Material hopper, dosing device and vacuum pump
Special acessories: material temperature sensor and material pressure sensor
Extrusion height: 1150 mm
Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH)
Weight: 3000 kg
Remark: Screws and barrel were replaced two years ago.
Condition: The extruder was repainted (light gray, RAL 7035)
and checked for function.