Re-Th 400/1,000/7

Rudnick & Enners
Model: Re-Th 400/1,000/7
Machine type: hacker systems

Description:
Drum chipper
Inlet height: 400-450mm
Inlet width: 1050mm
Rotord.: 1,000mm
Rotor width: 1.130mm
Number of knife: 2 wood knives, 1 counter meter
Performance: approx. 70-80rm/h depending on the type of material and moisture, with ahead 280 kW: 100-170 SRM/H depending on the type of material and moisture
Hack length: approx. 30mm
Casting: approx. 25m/min
Progers: 2x9.2kW
Covering unit: 7 rollers (3 above, 4 below)
Target management: horizontal
Drive: via V -belt
(New rotor as a spare part)

BJ 2014
Presite with
Motor 315kW
limited to 280 kW:

Trough chain conveyor - scratch conveyor - sponsor in the subtrum
KF 160/80/2R x 24000
-Werstus management
To take over the sifted wood chips and transport to the pipe belt conveyor, course with 1 lower sheet, drive approx. 15 kW
Bj 2011

Pipe belt conveyor
RGFO 1200/900 x 37000
Execution with a foldable upper half, clamping station manual, drive approx. 11 kW, with wiper, 2 filling level monitoring, up and handover funnel
Bj 2011