Polar 115 XT

115 XT cutting line with RA-4 jogger and two LW 1000-4 and LW 1000-4-EV pile lifters and optional counting scale

Workflow:
The material to be cut is brought to an optimum working height on the right side with a loading lift,
placed in the jogger by the operator using the optional counting scale, and jogged there.
and then transported via a transfer table element to the front table of the high-speed cutter.
After cutting, placed on the unloading lift with stacking aid.

Polar stacking lift LW 1000-4
from yr. 2004
Platform 80x126mm
The automatic lifting of the material to be cut allows the operator to cut in a way that is convenient for him.
ergonomically favorable working height the material into the automatic jogger or directly into the
load the cutting machine.
However, the stacking lift can also be used for stacking cut material and has an adjustable stacking aid.
Stacking lifts do not need to be anchored in the ground and can therefore be easily moved.
They are equipped with continuously adjustable reflex light barriers for automatic lifting or lowering.

Automatic jogger RA-4 with air spreading roller
from yr. 2004
After the jogging process is completed, the air is pressed out of the cutting layer.
You can spread 1 or 2 times, whereby the pressing pressure of the first spreading operation can be adjusted
is and when the table is tilted also “strike out” in between

Table size 900x1150mm stainless steel plated
Layer height min. 30 mm
Layer height man. 165 mm
Table height 860 – 950 mm
Compressed air requirement at 6 – 8 bar approx. 2L/min

Polar 115 XT cutting machine with direct touch control
from yr. 2004
– nickel-plated transfer air corners
– nickel plated air table
– two Resopal air side tables 100×100
Cutting length 1150 mm
Insert height max. 165 mm
2 Knives

Unloading lift with stacking device Polar Mohr Stacking lift LW 1000-4-EV
Year of manufacture 2004
Platform 80x126mm

The automatic lifting of the material to be cut allows the operator to cut in a way that is convenient for him.
ergonomically favorable working height the material into the automatic jogger or directly into the load the cutting machine.
However, the stacking lift can also be used for stacking cut material and has an adjustable stacking aid.
Stacking lifts do not need to be anchored in the ground and can therefore be easily moved.
They are equipped with continuously adjustable reflex light barriers for automatic lifting or lowering.
Stacking device – side alignment ruler and back wall facilitates edge accurate,
manual backstacking of the material to be cut after cutting