Pester PESTER PEWO COMPACT THERM III 250SN+250E
EUROPE (Central and Eastern)
Brand: PESTER
Specifications
Type: Automatic
Motor power:
8.1 kW
Length x width x height:
7270 mm × 2410 mm × 2090 mm
Weight
1680 kg
State: good
Status: under power
Description
Functional description
The PEWO-pack 250 SN is an electronic / pneumatic controlled bandero ling machine with foil tighten device to pack single or multiple bundle packs. Working table front and back The in feed piston is pushing the bundle through the foil curtain under the controlled holding-down device. With the back running of the pushing piston into the start position, the sealing bar is running downwards. The foil loop with the bundle inside will be tightened during this operation. The sealing bar is moving back and will first cut the foil with the pointed edge and at the same operation, it will seal the foil curtain for the next following bundle and will close with a second seam the foil around the bundle.
Shrink tunnel Foil roll holder
The sealing bar will move back into the start position and the seam can be cooled in the mean time. The next following bundle will push the sealed one out of the sealing area
Technical data's
Manufacturer: Pester
Country of origin: Germany
Banderolier model: PEWO-pack 250 SN
Shrink tunnel model: PEWO-therm II 250 E
Made: 1998
Machine number: 4213
In feed direction: up front
Capacity: 35 cycles/min.
Energy consumptions
Voltage: 400V + N + PE 50 Hz
Control voltage: 24 V
Electrical consumption: 8,1 kW
Fuse protection: 25A
Compressed air inlet pressure min./max.:: 5 bar / 9 bar
Working pressure: 5.2 bar
Compressed air consumption: 180 Litre/min.
Pneumatic components: Festo
Foils
Foil type: PE, PP
Foil width min./max.: 50/ 390 mm
Foil thickness min./max.: 25 μm / 80μm
Foil roll diameter: 300 mm
Core diameter: 76 mm
Shrinking tunnel
Length: 1250 mm
Width: 1300 mm
Height: 1200/1300 mm
Weight:100Kg