Perkin Elmer

Perkin Elmer Series 200 Vacuum Degasser

Specification Description
Channels 1-5 independent
Degassing Process Gas permeation through a fluoropolymer membrane
Maximum Recommended Flow Rate 3.0 mL/min.
Pressure Drop 1.37 mm Hg/mL/min.
Degassing Capacity ~25% dissolved gases remaining in 60:40 MeOH/Water mixture at
1 mL/min.
Dead Volume ~480 microliters per channel for standard channel
Materials contacting solvents PEEK, Glass-filled PTFE, Teflon AF
Power:
Power requirement if using supplied AC
Adapter 100 to 240 VAC (±10%), 1A, 50 to 60 Hz (±3 Hz)
Power Requirement if not using supplied AC
Adapter 15 to 24 VDC at 0.85 A maximum (0.5 A typical)
Wall Sockets 4 supplied with AC Adapter, interchangeable: North
America/Japan, U.K., Continental Europe, Australia
Installation Over-Voltage Category II
Validation Output:
Signal 5 mVDC / 1 mm Hg absolute from 20 to 800 mm Hg
(0.100 VDC at 20 mm Hg; 4.000 VDC at 800 mm Hg)
Accuracy ±1.0% of reading ±0.010 VDC from 20 to 800 mm Hg
Operating Conditions:
Ambient Temperature 10 to 35 ºC
Ambient Relative Humidity (RH) 20 to 80 % RH (without condensation)
Altitude 0 to 2000 Meters
Indoor vs. Outdoor Use Indoor
Pollution Degree 2
Storage Conditions:
Ambient temperature -20 to +60 ºC
Ambient Relative Humidity 20 to 80% RH (without condensation)
Altitude 0 to 12000 M

This refurbished Perkin Elmer Series 200 Vacuum Degasser is in great condition.