Pama SPEEDRAM 2 150 mm 3.000 U/min, 2 gear steps

PAMA SPEEDRAM 2
built: 2002

control: SINUMERIK 840 C
Maschine ab Standort verfügbar
Technichal Equipment / Features
working area:
X-Axis, lateral movement column 11.000 mm
Y--Axis, vertical movement spindle unit 2.800 mm
Z-Axis, longitudinal movement RAM 900 mm
W-Axis, movement quill 800 mm
machining unit:
in hydrostatic design
cross section RAM 360 x 400 mm
RAM movement (Z-axis) 900 mm
spindle diameter 150 mm
spindle movement (W-axis) 800 mm
lowest position above table surface 0 mm
spindle taper (short taper acc. to DIN 69871) ISO 50
spindle power S1 (100%) 60 kW
max. torque at spindle 2.900 Nm at 195 U/min
spindle speed range 6-3.000 U/min, 2 gear steps
max. feed 15.000 mm/min
clamping surface: 2 piece
clamping surface area (2 pc.) 4.000 x 2.500 mm, thickness 300 mm
max. workpiece load 15.000 kg/m2
feed and speed range:
max. feed range for X-axis 20.000 mm/min
max. feed force for X- an Y-axis 30.000 N
max. feed range for Y- and Z- axis 15.000 mm/min
max. feed force for Z-axis 25.000 N
rapid traverse for X-axis 20.000 mm/min
rapid traverse for Y- and Z-axis 15.000 mm/min
design features:
X-Axis
Slide for column with hydrostatic guideways on low-friction guideway plates. Drive system with Servomotor, Duplex-Pinions and Gear Rack. The pinions are pretensioned hydraulically for zero axial play.
Spindle unit
The high-precision RAM, made of meehanite cast iron in a rectangular shape, slides on hydrostatic wedge bars machined directly into the head unit. Inside the RAM runs - axially on bronze bearings - the boring quill. It is supported by front and rear angular contact ball bearings in high precision design.
tool magazine:
type chain magazine
number of tools 90
data of electrical installation:
operating voltage 3-400/230 V
frequency 50 Hz
power requirement 195 kVA
total power consumption 125 kW
space requirement and weight:
total footprint 16 x 7,7 x 5,5 m
total weight ca. 50 t
total power consumption 125 kW

accessories:
3D touchprobe Renishaw MP7
Chip conveyor between floor plates and X-bed
Operator platform moving vertically
Tool magazine with manipulator, 90 positions
Tool breakage and wear monitoring (ARTIS)
Movable Pick-up station 1+1 for speed milling head
Speed milling head MG4, SK50, 13kW, i = 1:4 , M_max = 405Nm, U_max = 8,000 rpm