OTT Pacivic V12 F

Right-hand edge processing center on one side

Gluing and processing of: veneer, plastic and solid edges
Edging thickness 0.2 - 6 mm

Workpiece dimensions:
Width min. 70 mm
Height min. / Max. 8/52 mm
Length min 160 mm (strip edges)
Length of 60 mm endless from the roll

Operating voltage: 400 V, 50 Hz
Throughput speed: 12 m / min
Glue application: over application roller
Working height: 880 mm
Air connection: 6 bar, 1/4 inch
Suction connection: central suction nozzle, DM 160 mm
Total connected load: approx.11.5 kW

Machine equipped with:
- Double roll top print with electronic positioning.
- Single feeder for strip and solid edges
- Automatic roll magazine for rolls up to 800 mm in diameter with pneumatic cutting device up to 3 mm thick.
- Automatic infeed ruler, therefore no manual adjustment work on edge thickness
necessary.
- Powerful 7 inch TFT touch color display

DOUBLE CAP UNIT
- with 2 HF motors 0.2 kW, 12,000 n
2 automatic positions = 0 + 3 degrees

FLAT MILLING DEVICE
One-sided keying With 2 HF motors 0.7 kW, 12,000 n
2 carbide inserts 70 x 20 x 16 mm, Z 4

RADIUS MILLING UNIT
- with 2 HF motors 0.3 kW, 12,000 n, two
groping on both sides, automatically controlled
2 carbide inserts 70 x 20 x 16 mm, Z 4

RADIUS BLADE DEVICE
- Two-sided, automatic control for pulling off rounded PVC and plastic edges.

CORNER ROUND DEVICE
- with 2 motors, 0.35 kW 12000 n, 200 Hz,
grooving on both sides, 1 work spindle each for top / bottom

- SURFACE BLADE UNIT with fine feeler for removing hot melt adhesive in the joint area

- JOINING PART
for joining chipboard with 2 HF motors 1.5 kW, 12000 n, working in the same direction and in the opposite direction, automatically controlled incl.

Machine dimensions: L x W x H = 4500 x 950 x 1300 mm
Machine weight: approx. 1650 kg