Others UPACTING HYDRAULIC PRESS Max. 2500 Ton

Brand: R.D. Woods
2500 TON 4-POST
UPACTING HYDRAULIC PRESS

Bed Area(Overall): ……………………….123″ x 228″ (10’3″ x 19′)
Upper platen area: ……………………….123” x 228” (10’3” x 19’)
Between posts (clear): ………………….14′ x 10′ or 19′ x 9′ (fully supported area)
Stroke: ………………………………………..0″ – 60″, variable
Daylight: …………………………………….60″ – 144″ (5′- 12′), variable (power adjust)
Design tonnages: …………………………270 / 790 / 1900 / 2500 Tons (capacity depends
on which cylinder combinations are selected)
Cylinders: ……………………………………Four of 11″diam / one of 28″diam / two of 36″diam.
Design hyd. pressure: …………………..1690 psi
Working height: …………………………..20″ above floor level (as presently installed)
Height above floor: ……………………..19′ 3″ (as presently installed)
Pit depth: …………………………………..10′ 3 1/2″ in general, but with piping troughs
down to 16′ (as presently installed)
Height overall: …………………………….29′ 6 1/2″ above the feet (which rest on the
bottom of the pit, 10′ below floor level).
The cylinder bottoms extend 21″ below the feet.
Weight (approx.): ……………………….616,000 lbs. (press only)

EQUIPPED WITH:
• Fully T-slotted lower (moving) bed platen (16 slots @ 7 1/2″ centers)
• Fully T-slotted upper (crown) platen, to match (16 slots @ 7 1/2″ centers)
• Power nuts for adjusting the crown height for variable daylight (fitted 1968)