JX9 120 Cm Nonwoven calender

3 rollers calender for non-woven, Cenaro JX9
working width: 1200 mm, rollers width: 1300 mm
Calender is designed for finishing of nonwovens with a basis weight of 20 g/m² to 300 g/m²

Technical data:
3 steel rollers with diameter: 300 mm each
working width: 1200 mm
rollers width: 1300 mm
temperature of rollers: max 200 °C
Rollers pressure: max 50 kN/m (50 kG/cm)
Speed. 0,8 - 19 m/min

Hydraulic pressure of the rollers, using 4 cylinders (two on the upper shaft and the lower shaft, independent control)
. cylinder diameter 63 mm
. Max. working pressure in hydraulic system 12 MPa
. These hydraulic cylinders powered by HL-46 hydraulic power (driven by an electric motor)

The heating of the shaft I and shaft II is three-zone, the lower shaft is not heated
. Heating power of the shaft main zone: 7.2 kW
. Heating power of each of the two side zones 1.2 kW
. Total heating power of both shafts 19.2 kW

Calender has a winding device equipped with a metering sensor measuring the length of the web in the web.
The largest diameter of the filament is 400 mm
Total power installed in calender is 21.8 kW
Calender has a control cabinet with operator panel

External dimensions of calender:
. width - 3335 mm (with 3665 mm control cabinet)
. length - 1340 mm (with control cabinet 1645 mm),
. calender height - 2295 mm