HAL Cemco Quicksilver for pcb production
RUSSIA and Central Asia
HAL Cemco Quicksilver. Equipment is in excellent condition, fully functional and ready for shipment from our warehouse in Russia.
YOM 2005
Specifications
MODEL: FPO8-GA-09R MANUF’R DATE: 19/08/96,
DESCRIPTION: ENCLOSED 30″QUICKSILVER WITH 5°TIPS
SERIAL No: WO 026926 / JN 007209
LENGTH: 1350 mm
WIDTH: 1730 mm
HEIGHT: 2978 mm
WEIGHT: 925 Kilo
ELECT. CIRC: CD996
PNEUMATIC CIRC: PN1012
MAX. SINGLE LOAD: 7.5 Amps
SHORT CIRC. PROTECT: 10,000 AMPS
ELECTRICAL:
1) CABLE: 4-WIRE
2) VOLT: 400V, PHASE: 3
3) FREQ: 50 HZ NEUTRAL: NO EARTH: YES
THIS EQUIPMENT MUST BE GROUNDED
FULL LOAD CURRENT: 50Amps
AIR SUPPLY:
60 CFM [1700 1/Min]
AT 100 PSI [6.5 Bar]
AIR HOLDING TANK: 15 Cubic ft [425 litres]
EXTRACTION: 45 Cubic Metres/Min. AT 76 mm WG,
MAX.SIZE: 610 X 762 mm
MIN.SIZE: 254 X 150 mm with 2-pin fixture,
50 x 50 mm with clamp-arm assembly.
THICKNESS: 0,8 – 3.2 mm (as standard)
FEED RATE: Minimum 6 Seconds subject to panel size.
SOLDER FILL: 300 KG [660 lbs] APPROX.
HEATERS: DIP.ZONE: 2.5 KW
PUMP ZONE: 3.0 KW A/KNIFE: 3.0 KW
POWER: 12 KWhr Typical but dependant upon
Production Duty cycle
AIR: 0.5 – 1.7 Cu.M/min Typical but dependant upon Production Duty cycle.
FLUX: 25 Litres per 140sq metre approx subject to flux applicator settings.
HEAT: APPROX 950 WATTS Subject to production duty cycle
NOISE:
EQUIV.CONTINUOUS ‘A’: 75 dB
{ If over 70dB(A) }
PEAK ‘C! SOUND PRESSURE VALUE: N/A
{ If above 130 dB(C) }
SOUND POWER LEVEL: N/A
[If ‘1/.’ exceeds 85 dB(A) ]
Tech Data PDF