Others Cutting set log

1 x CUTTING SET LOG
Visible assembly installed, department 55, consisting of:
DECK A ridge
2 sprigs 7M length
flat string 160 with cleats
tree Ø75 - Ø400 nuts - 8 dts
IPN structure 180mm
Height start: 0m700
Final height: 2m00
distance between chains: 1m

CHARGER-PONT HALF MOONS
2 half moons double
spacing 55 + 90 + 55 cm
total width 2.10m
Feeder with integrated chain

TROLLEY AND BERTRAND GARCIN
3 pneumatic claws
Entrant and outgoing clamps, projecting up to 120mm.
distances from the clutches 950 and 1200 mm.
superior double claws: max opening 950 mm.
moving dolls on round central slide.
traction dolls chain.
3 pinball-lifters slabs, tires.
Pinking tires to block the scratching.
Mudata division two-speed.
sitting in the cabin control station
Reserve integrated under pressure to air carriage
length 15m rails - rails height: 105mm
total width of the carriage: 2m08
height of the truck with rails: + 1.50m trolley pole
Total truck length: 4m40

FRAME SAW E.GILLET 1300
Type: TO 130
Flying full cast, diameter x width: 1300 X 140 mm.
blade guides: classics, to rubbers.
Puisssance engine 55 kw (75 hp).
pneumatic retractable protective type PPT4
guide arm and electrical control voltage blade

WINCH OF ADJUSTED DC
DC motor: 39.7Kw
LEROY SOMER drive VTR (08/12/2014)
Double reference chain
winding cable drum: Ø400
wire cable: Ø22

ROLLS OUT SAW
8 rolls of 900x190 mm.
Training mono channel 25.4 mm.
length 3m90
center distance 500 - floor height 1m42
1 pneumatic arm tackle
recovery range 3 arms length 4m
center distance: 1 m 1 m
flat chain 40
2 pneumatic cylinders

ADDITIONAL ROLLERS
28 rlx of 800x150 mm.
10m80 length
1 ejector tabs 4 ch D / G
spacing of the ejection arm: 1m10 + 0m60 + 0m48

TRANSFER OUT
3 100 flat channels (strong)
3m35 length
center distance: 720 + 550mm
tensile axis, diameter: 60mm

TRANSFER TO EDGER
3 channels 25.4 with cleats
800 + 800 mm distances.
4m90 length
Start height: 250mm
Final height: 1550mm

BELT CONVEYOR HORIZONTAL
In addition to the rollers.
horizontal band
complete with gearmotor
Base metal.