Omga T2020 NC Elite Throuhfeed Optimizing Saw

Last Generation automatic programmable cut-off saw for optimized cutting of wood stock and defect removal
Particularly suitable for high production requirements given its very high maximum feed speed of 800 FPM
The set of 7 top pressure rollers are able to compensate for dimensional variations of rough mill stock
The machine is equipped with a PC based computer capable of performing eleven work cycle programs
The numerical control is able to store cutting lists with lengths divided in several different grades and the relevant quantity of parts
Cutting lists can be input direct from the PC keypad, USB, or directly through the network

The software is complete with diagnostic and can also provide the following information:
- Stock in cubic feet, required to produce the number of pieces in each list.
- Number of pieces produced of each length.
- Amount of stock in cubic feet divided into: first, second, third grade and waste
- Cubic feet required to produce remaining parts.
- Yield as a percentage of the total

The system can perform simulated cutting to verify the result before processing the wood
and allowing the user to decide whether to use the chosen parameters for the required production or change it
The T 2020 NC can cut and handle up to 3 different grades within the same cutting list
Maximum Thickness: 4 3/4"
Maximum Width: 12 5/8"
Minimum part in-feed length: 23 5/8"
Saw Blade Motor Power : 7 1/2 HP
Feed Motor Power: 10HP
Maximum Acceleration: 50 feet per second
Cutting Speed: 0.2-1 seconds
Average Number of Cuts : 80-90 per minute
Specifications are written to the best of our knowledge with some being sourced from literature, we encourage you to inspect the machine and verify
Ink Jet Printer
3 kicker stations - Currently oriented to the rear of the machine