Okuma MCV-AII 3 Axis

OKUMA MCV-AII

X 157.48"
Y 78.74"
Z 17.72"
Power 30 hp
RPM 4,000 RPM
Taper 50
Table-W 59.06"
Table-L 149.61"
Dimensions 210.04 x 397.64 x 180.51
Weight 60,720 lbs

Specifications:

Travels:
X-axis........................... 157.48"
Y-axis........................... 78.74"
Z-axis........................... 17.72"
W-axis........................... 45.28"
Effective Width Between Columns.. 80.71"
Table to Spindle Nose............ 0-60.24"

Table:
Working Surface.................. 59.06" x 149.61"
Maximum Load..................... 26,400 lbs
Hight From Machine Bottom........ 29.53"

Spindle:
Speed............................ 4000 RPM
Taper Bore....................... 7/24 taper No. 50
Pull Stud........................ MAS-2

Feed Rates:
Rapid Traverse (m/min)........... X-Y: 20, Z :10
Feed Rate (mm/min)............... 1 - 10,000

Automatic Tool Changer:
Tool Shank....................... MAS BT50
Pull Stud........................ Mas B50T-2
Tool Magazine Capacity........... 24
Max Tool Diameter................ 5.04 (w/ adjacent tools) 9.06 (w/o Adjacent Tools)
Max Tool Length.................. 15.75"
Max Tool Weight.................. 44 lbs
Tool Selection................... Fixed Address

Motors:
Spindle Drive.................... 30/25 HP (30min/cont)
Axis Feed Drive.................. X-Y-Z : 5.6 HP
Crossrail Traverse Drive......... 4.9 HP

Power Sources:
Electrical Power Supply.......... 40*6
Compressed Air Supply (L/min).... 500 (0.5 MPa or more)*6

Machine Size:
Height........................... 180.51"
Floor Space...................... 210.04" x 397.64"
Weight........................... 60,720 lbs

Standard Accessories:
Spindle Drive - 29.5HP/24.8 (30min/cont)
Spindlehead Cooler (Oil controller)
Hydraulic Unit
24 Capacity ATC
Tool Shank BT50
Toolkit / Toolbox
LED Work Lamp (under rail)
Cross Rail Position is Non Programmable
90 Degree Manual Angular Attachment Preparations