OEC 9600 C-Arm

The C-arm can orbit in its cradle through an arc of 115 degrees.
The back of the C-Arm is marked with an angular scale to aid in positioning.
The 9600 can also pivot on its cradle axis up to 180 degrees.
This provides greater versatility in positioning the X-ray tube and image intensifier by allowing them to reverse or flip-flop their relative positions.
The L-Arm of the C-arm can be rotated up to 180 degrees allowing up to 360-degree rotation.
The L-arm is rotated with an internal motor using the motorized rotation buttons on the top of the C-arm control panel.
For even more positioning the C-arm also has a vertical lift. It can be raised up to 18-inches (46 cm).
The vertical lift is also controlled by a motor and can be operated with the motorized column life buttons on the top of the c-arm control panel.
The GE 9600 can also be extended up to 8-inches (20cm).
The entire C-arm and L-arm assembly can swing, or wig-wag from side to side up to 11 degrees both directions.

Specifications :
Dual 16″ High Resolution Flicker Free Monitors
Tri-Mode 9″/6″/4.5″ Image Intensifier
Rotating Anode X-ray Tube (0.3mm & 0.6mm) Focal Spots
4.0 kW High Frequency Generator
12 mA Fluoro Boost
High Resolution CCD Camera
10 bit Digital Image Processing
200 Image Storage
Collimator with dual opposing shutters
MARS-Motion Artifact Reduction System
Frame Averaging
Last Image Hold (LIH)
Output to Floppy Disk
Thermal Printer
Multiple specialty packages available; GSP, ESP, Vascular, and Neuro Vascular