NuAire NU-5810 CO2 Incubator

The In-VitroCell NU-5810 Direct Heat CO2 Incubator is expertly crafted to foster optimal cell growth conditions.
Equipped with dual decontamination cycles, it ensures precise control over temperature
and CO2 levels, bolstered by cutting-edge microprocessor technology.
This design meets the highest performance standards and excels in minimizing contamination risks.
Its advanced capabilities make it ideal for meticulously storing and preserving gametes and tissue cell cultures at or near body temperature.
It provides a reliable and controlled environment essential for modern laboratory demands.

Specifications:
CO2 Control:
CO2 Accuracy: ± 0.1%
CO2 Control Logic: Fixed Algorithm/Manual, Environmental Adaptable
CO2 Display Resolution: 0.1%
CO2 Range: 0.1 to 20%, 5% Default Set Point
CO2 Recovery: Up to 5% ± 0.2% / -0.5 in 5 minutes Average
CO2 Sensor Type: Infrared (NDIR)

Configuration:
Segmented Doors: Optional Set of 4 Inner Doors

Construction:
Access Port Location: Right Side
Chamber Air Filter: 99.97% Efficiency @ ≥ 0.3 Micron Capsule Filter Located in Sensor Bay
Exterior Door Seal: Magnetic Outer Door Gasket
Exterior Material: Cold Rolled 16 & 18 Gauge Steel, Finished in Powder Coated Polyurethane Finish
In-line Gas Filters: 99.97% Efficiency @ ≥ 0.3 Micron Disk Filters for Gas & Air Supplies, Disk Filter for CO2 Sensor
Inner Doors: One, single or sectional
Insulation: High Density Insulation with High “R” Rating
Interior Door Seal: Silicone Rubber Gasket
Interior Material: Highly Polished Type 304L 16 Gauge Stainless Steel
Sample Port Location: Inner Glass Door
Shelf Material : Stainless Steel or Stainless Steel Enriched Copper
Shelves: 4 Shelves Supplied, 20 Shelves Maximum Capacity

Controls and System Features:
Data Output Features: RS-485, USB, 4-20mA
Remote Alarm Terminals: Standard
Electrical Configuration: 115V60Hz
Power Cord Length Foot (Meter): 8 (2.5)
Decontamination Cycle:95°C Humidified Decontamination, 145°C Dry Decontamination Cycle
RH Control Method: Water Pan, Convection
Chamber Air Circulation Method: Air Pump
Chamber Jacket Technology: Air Jacket via Two Axial Fans Drawing Air into Shell
Control System: NuTouch
Net Weight lbs (kg): 235 (106)

Temperature Control:
Chamber Heater(s) Location: Sides, Bottom, Top and Back of Chamber
Door and Perimeter Heater Control Logic:Base Duty Cycle set to chamber temperature Set-Point, Proportional 0-100% [manually adjustable]
Temperature Accuracy °C: ± 0.1%
Temperature Control : Direct Heat
Temperature Control Range: 5°C above ambient (to a 30°C max ambient) to 55°C
Temperature Display Resolution: 0.1°C
Temperature Recovery: 0.12°C/min. on Average
Temperature Sensor Type: Precision Integrated Circuit
Temperature Set-Point Range: 5°C to 55°C (37.0°C Default)
Temperature Uniformity °C: ± 0.35°C @ 37°C