Myford MG12-HM

Myford MG12-HM
1998

Grinding Diameter – Maximum…………3″
Swing Over Table…………5″
Table Travel – Maximum…………13-3/4″
Distance Between Centers…………12″
Table Swivels either Direction…………10 Degrees
Table Travel per Revolution of Handwheel…………0.44″
Hydraulic Table Traverse…………0 to 120″/Minute
Dwell (Carriage)…………0 to 8 Seconds
Wheelhead:
– Total Travel by Feedscrew…………3-7/8″
– Hydraulic Rapid Retraction…………1-1/8″
– In-Feed per Revolution of Handwheel…………0.04″
– Wheelfeed Graduations…………0.0002″
– Fine Feed to Dead Stop…………0.00005″
– In-Feed – Mechanical…………0.0002 to 0.002″
– Wheel Speeds…………1830 & 1988 RPM
– Grinding Wheel – Recessed…………12″ x 1-1/2″ x 5″
– Wheel Diameter for Zero Work Diameter – Minimum…………10″
– Wheelhead Motor…………3 HP
Workhead:
– Motor…………1/2 HP
– Speeds (steplessly variable)…………50 – 900 RPM
– Capacity through Standard Drawtube…………3/4″
– Collet Capacity – Maximum…………3/4″
Hydraulic Power Pack:
– Operating Pressure – Normal…………200lbs./in²
– Operating Pressure – Maximum…………230lbs./in²
– Tank Capacity…………6.5 Gal.
– Pump Motor…………0.5 HP
Approximate Weight…………2,500 Lbs.