MTA Plasticizer roller extruder nip roller press
EUROPE (Western and Northern)
Drive motor: 180 KW
Throughput: 800-1000 kg per hour
For plasticizing any shredded plastic waste.
Finally, shredded film waste was processed.
PVC such as cable waste is also possible.
The roller is heated by means of carrier oil.
Functionality:
The squeegee roller heats and kneads the plastic waste continuously into a hot pulp,
shredded material is continuously fed to the roller and particularly well heated and kneaded material is formed into a sausage using a scraper on the back.
The heated plastic sausage goes through a guillotine into a dosage form.
Once the desired mass has been reached, the sausage is sheared off using the guillotine, the dosage form unfolds and the plastic sausage is conveyed to the 1000 t presses by means of a conveyor belt,
where parts are squeezed out. Such as pallet planters etc.
Heating is not included because it also heats the hall.
Only the star-delta connection of the motor is included
A submission of the individual parts may be possible, for example
Motor 180 KW
Extruder gear
guillotine
Dosing device