Mk 145 PROMATRIX CSB

Maximum sheet size 1,450mm x 1,060mm
Minimum sheet size 580 x 450mm
Maximum die cutting size 1450x1045mm
Gripper margin 9-17mm
Convertible stock Cardboard: 0.1-2.0mm (90-2000 gsm)
Corrugated: ?2.0mm (If MasterSet as option)
Corrugated: ?4.0mm (Standard)
Preset max. die cutting, pressure 5.5 MN
Maximum working speed 7,000 sheets per hour
Max. feeder pile height 1,800mm incl. pallet, 2,000mm (if elevation 200mm as option)
Max. delivery pile height 1,500mm incl. pallet, 1,700mm (if elevation 200mm as option)
Overall dimensions (L x W x H) 12,840mm x 7,552mm ((including operation , platform) x 3,226mm
Machine Net Weight 38,500kgs
Main motor power 30 KW
Rated power 41 KW
Full load power 55 KW
Air source requirements Pressure 0.6?0.7Mpa, flow rate >2 m3/min
The speed and accuracy will be changed with different type of products.
Non-stop high-speed sheet feeding unit with Stream type paper feeder, Sheet slow down
Adjustable air sucker, 3 feeder anti-collision devices
Motorized lateral paper pile adjustment
Auto-alignment of the paper pile.
Motorized size adjusting advice for side blower and alignment
Pull-and-push side lay
Pneumatic lifting device for sheet feeding frame
Electromechanical double sheet detector
Side lay, front lay sheet photoelectric detector
Paper transferring belt with high quality
Gripper bars forced open and paper clamping system when sheet not in place
Non-stop alternating of main and auxiliary feeding piles, non-stop operation of the feeder.
Powerful sheet suction feeder with four suction heads and five feeding heads.
4 sets of paper pressing brush roller combinations.
20 sets of Paper pressing wheel combinations.
1 set of non-stop paper inserting rods
Vacuum Generator (delivery with the machine)
Non-stop feeding moving down 400mm for corrugated6 front lays, 2 side lays.
Die cutting unit, Servo motor pressure regulating mechanism.
The die-cutting lower base plate is equipped with a 4mm steel plate, Chase turnover device, Lubricating oil cooling and lubricating system for the main transmission box, Oil temperature control system for the main machine, Torques limit overload protection
Complete set of gripper bar with adjustable system, 9 pcs in total
High quality main transmission chain
High quality intermittent slicer
High quality timing belt
Pneumatic clutch brake device for main drive
Die cutting chase bidirectional pneumatic locking system
Lower cutting-plate pneumatic locking system, 1 spare gripper bar, Quick lock die-cutting chase 2 sets.
Stripping unit - Upper stripping frame pneumatic lifting device.
Upper stripping frame with central positioning and quick lock device
The stripping middle board support device with pull-type function
Machine stop in stripping for sample taking, Lower stripping drive mechanism, Lower stripping frame with centre positioning method
Stripping upper frame aluminium profile frame 2 sets
Stripping lower frame aluminium profile frame 2 sets, 100 sets of stripping pin hook 100, 24 sets of beam hook, 9 sets of adjustable beam, 30 sets of extendable stripping pin
Stripping pin, (50pcs for each), 90 pieces of stripping pin connecting block
Waste container for stripping
Blanking Unit - Upper box-split frame pneumatic lifting device 4 /Upper box-split frame with central positioning and pneumatic quick lock device
Upper box-split tools aluminium support frame 1set
Pull-type lower box-split tools support frame
Pile auto-down sensor motorized up/down adjusting device
Full sheet delivery device 1 set. Non-stop delivery
Sheet insert counting device
Fully automatic pallet changer (on ground is standard, in ground is option).
Non-stop delivery paper inserting rod 1 set
Non-stop delivery moving down (max. 300mm )
Vacuum bar, Waste edges conveying unit - Waste edges conveyor system
Pneumatic flap for test sheet removal, 1x waste container for delivery station.
Electrical unit - SIMENS colour HMI, SIMENS PLC, SIMENS converter
Imported low voltage control elements, Imported sensor, limit switch
Delivery section with safety light barrier detection
Auxiliary delivery with single safety circuit detection
Complete machine with double circuit multi-touch redundancy design for the safety emergency circuit detection, safety door & etc.
GS certificate, Steel operation platform 1 set, Tool box 1 set, Operator manual 1 set, Maintenance instruction 1 set, Spare parts book 1 set