MJ Research PTC-100, Thermal Cycler

Hot Bonnet heated lid
NIST-traceable calibration
Produce highly accurate incubations
Parallel printer port
Power-failure protection
Fitted with Peltier-effect heat pumps
14 pre-programmed protocols

Thermal range 0–100°C electronically (with Peltier-effect heat pumps)
Accuracy ±0.5°C of programmed target at 60°C
Thermal homogeneity ±0.4°C well to well within 30 seconds of arrival at 60°C
16MS slide block ±0.4°C within 30 seconds of arrival at 90°C
Ramping rate
60-well block up to 1°C/sec
96-well up to 1.2°C/sec
96AgV gold/silver block up to 2.5°C/sec
16MS Slide Block up to 0.5°C/sec
Sample Capacity
Dimensions (H x W x D) 45 in. x 30 in. x 39 in.
60-well block Sixty x 0.5ml tubes
96-well block,
96AgV gold/silver block 96 x 0.2ml tubes or one 96-well plate
16MS Slide Block Sixteen 25 x 75mm slides and 24 x 0.2ml tubes
Line voltage 100–240VAC rms (no adjustment needed among voltages within these ranges)
Frequency 350W maximum (momentary 4.5 A)
Fuses Two 4A, 5 x 20mm (4 ampere)
Displays One 2 x 16 LCD alphanumeric display
Ports One 25-pin 8-bit parallel interface printer port