Mixing and bleanding line type LDM LDM

HOPPER FEEDER BALE OPENER - Type "CB.C/25
Quantity : 4
Working width -2500mm
Maximim horary production with weighing -450/550 kg
Maximum horary production without weighing -1300 kg
Working length of the hopper for feeding -2000 mm
Total length of the hopper with part of work -3000 mm
Installed power to drive the feeding bench - 0,6 kw
Installed power to drive the milling bench -3 kw
Installed power to drive the levelling brush -1,5 kw
Installed power to drive the discharging comb -1,12 kw
Installed power to drive the interception throttle -0,18 kw
Installed power to drive the opening of weighing box -0,18 kw

BALANCE FOR HOPPER FEEDER - Type C.S.S.
Quantity : 1
Capacity for each turn of the needle on the dial -10 kg
Division -10gr
Volume of the weighing box 0,7 m3

COLLECTING BENCH – Type TC.C/8
Quantity : 1
Working width - 800 mm
Installed power to drive the bench -1,25 kw
Total length transporting bench for 4 hopper feeders bale openers type СВ.С/25 -15 m

Carding willow machine type CL 24
Quantity : 1
Available working width:. 1500mm
Main cylinder* diameter an the pins: 1500 mm
Main cylinder speed: 120 r.p.m.
Peripheral speed = 550 mt/l
Discharger-flywheel speed: 725 r.p.m. - peripheral speed = 1480 mt/l
Feeding device with no. 2 couples of introduction—cylinders.
No. 4 couples of working/stripping cylinders.
Feeding band speed: from 1 mt/l to 6,3 mt/l with continous regulation of speed by means of motovariators at variable speed.
Variable speed of the double feeding device and of- the working and stripping cylinders by means of the same raoto-variator-reducer that drives the feeding band.
Main cylinder drive and discharger flywheel: 11 kw
Feeding drive and working/stripping cylinders: 2,2 kw
Self acting lift of the cover-drive: 0,18 kw
Dusts suction under-carding machine: 4,12 kw
BEATING MIXING MACHINE - Type FВ.3 Quantity : 1
Length of betting tunnel - 2500 mm
Horary protection - 1300 kg
Installed power to drive the beating cylinder -15 kw
Installed power to drive the electric-fan -2,2 kw
"Installed power to drive the feeding bench -0,37 kw
"
ROOM FOR LUBRIFICATION AND HUMIDIFICATION type "COU 1"
Quantity : 2
Horary production -1300 kw
Installed power to drive turning plate -1,1 kw
Turning plate made of steel inox thickness -2 mm
External cylinder envelope in galvanized sheet of diameter mm, 1800, sheet thickness 12/10.
Internal little throat to suck material made of galvanized sheet.
Sheet base and strong thickness iron shapes.
Year(s) : 1985