Miller Moorehead DOWN-ACTING FOUR-POST HYDRAULIC PRESS

OVERALL LEFT TO RIGHT IS APPROX 157” AND APPROX 58” FRONT TO BACK BETWEEN THE TIE RODS.
NOMINAL BED SIZE OF 136” X 78”.
APPROX DAYLIGHT OF 62”.
TWO CLAMP CYLINDERS: PARKER 7” BORE WITH 5” DIAMETER RODS AND APPROX 53” STROKE (RATED TO 3000 PSI).
OPERATOR HEIGHT OF APPROX 31”.
FULLY GUIDED ON 6” DIAMETER TIE RODS WITH APPROX 18” BUSHINGS.
“SUPER-BOLT” STYLE TORQUE NUTS.
T-SLOTS (SKATE WHEELS IN BED).
TWO PNEUMATIC SAW-TOOTH RATCHET SAFETIES.
EXISTING LIGHT CURTAINS; SAFETY MATS AND SAFETY BLOCKS.
MEZZANINE WITH RAILING AND LADDER.

TOP-MOUNTED HYDRAULIC SYSTEM:
APPROX 400 GALLON RESERVOIR
100 HP MOTOR (230/460 VOLTS; 1800 RPM)
SUBMERGED PUMPS (VICKERS 45VTC VANE PUMP AND A PARKER PAVC 100 PUMP)
WATER TYPE COOLER
REGEN MANIFOLD
DRIP PAN
3 GALLON AIR COMPRESSOR (WITH AIR TANK); ETC…

ELECTRICAL CONTROL SYSTEM: ALLEN-BRADLEY SLC 500 PLC; PANELVIEW 600 HMI; 200 AMP DISCONNECT
OPTIONAL 8-ZONE TEMP CONTROLLER (PEDESTAL); E-STOPS; ETC…
OVERALL DIMENSIONS APPROX: 17’ X 9’ X 20’ TALL (SHIPPING HEIGHT OF APPROX 155”
(CYLINDERS LOWERED; HYD UNIT REMOVED)
HYD UNIT: 72” X 64” X 86” TALL
TEMP CONTROL PEDESTAL: 40” X 30” X 60” TALL
AIR TANK: 60” X 36” X 36”T
MISC PALLETS: 140” X 70” X 48” T AND 168” X 70” X 60”T.
PRESS APPROX 65,000 POUNDS; HYD UNIT 8,500 POUNDS; MISC 1500 POUNDS, SOME PRINTS.