Mikron UCP 600 3 Axis

MIKRON UCP 600
Year: 2000

Control Unit
Brand: Heidenhain
Model: 430M

Main drive
Spindle speed range: 42,000 1/MIN
Spindle motor power: 14 kw
Tool taper: HSK E-40

Movement
X-AXIS Movement: 530 mm
X-AXIS Working Feed: 15 m/min
X-AXIS Feed Force: 22 m/min
Y-AXIS Movement: 450 mm
Y-AXIS Working Feed: 15 m/min
Y-AXIS Feed Force: 22 m/min
Z-AXIS Movement: 450 mm
Z-AXIS Working Feed: 15 m/min
Z-AXIS Feed Force: 22 m/min

Table
Table load: Max 200kg

Tools
Slots in storage: 36
Max tool diameter: 16 mm

Additional Equipment
- Workpiece Measurement Probe: Renishaw OMP 40
- Workpiece Breakage Probe: BLUM (included but not installed)
- Thermal cones, collet chucks, and Franken PGR holders
- Custom-made post-processor for Mastercam with direct machine simulation

Additional Information
- Tool change time: 5 seconds
- Cradle rotation: -15º to 122º
- Table diameter: 280 mm
Qualitative Machine Benefits:
- Upgrades made to enhance the machine's precision, including a lubricated bushing on the cradle support, the spindle has been serviced with new bearings, tie rods, etc. , the bellows are brand new, and components that were worn out from use have been replaced
- The original support was directly on cast iron, which tended to seize up