Mazak GAP BED ENGINE LATHE 1200 RPM REX 610 x 4000

GAP BED ENGINE LATHE
MAZAK REX 610 x 4000


Swing Over Bed: 26"
Swing Over Cross Slide: 13-1/2"
Swing in Gap: 34-1/4"
Length of Gap in Front of Face Plate: 13-3/8"
Height from Floor to Work Center: 43-1/2"
Distance Between Centers: 160"
Hole Through Spindle: 4-1/8"
Taper in Headstock: #6 Morse
Spindle Nose: D1-11 Camlock
(16) Spindle Speeds: 12 to 1200 RPM
(80) Fine Feeds:
Longitudinal: .0022" to .0337" per rev (.058 - .891 mm/rev)
Cross: .0011" to .0188" per rev (.029 - .446 mm/rev)
(30) Coarse Feeds:
Longitudinal: .0385" to .2694” per rev (1.018 – 7.127 mm/rev)
Cross: .01925" to .1347" per rev (.509 – 3.5603 mm/rev)
Threads:
Whitworth: (40) 2 to 28 T.P.I - (16) Coarse 5/8 to 8 T.P.I.
Metric: (32) 1 to 14 mm - (20) Coarse 15 to 200 mm
Module: (25) 1 to 14 M - (14) Coarse 18 to 58 M
D.P.: (18) 2 to 23 D.P - (5) Coarse 1-1/2" to 1/2" D.P.
Compound Rest Travel: 9-7/8"
Cross Slide Travel: 20-3/4"
Diameter of Tailstock: 3-13/16"
Spindle Travel: 11-3/4"
Taper in Tailstock: #6 Morse

EQUIPPED WITH:
METRIC Graduated Dials on Carriage, Cross Slide, Compound and Tailstock Quill
15" 3-Jaw Chuck with 2 Piece Jaws with Bolt on Hard Reversible Top Jaws
8" Roll Type Supports Steady Rest
4-Way Power Rapid
Power Compound with Rapid
Multi-Start Thread Indexing Gear
Thread Chasing Dial
(1) Wrench for Chuck and Camlock
(1) Live Center #6 Morse Taper
(1) Headstock Bore Bushing for Morse Taper
Removable Coolant Pan Style (COOLANT PANS ARE MISSING)
20 HP Main Motor
Wired for 3 Phase, 60 Cycle, 480 Volts

Overall Size: 244" LR x 60" FB x 60" High x 12,000 Lbs.