Mazak Engine Lathe 300 RPM

Mazak Hollow Spindle Engine Lathe
Swing 30"
Centers 120"
Spindle Bore 12.5"
RPM 300 RPM
Power 20 hp
Dimensions R-L 16" X F-B 60" X Height 84"
Weight 18,000 Lbs.

Swing Over Bed Ways 30"
Swing Over Cross Slide 20-3/4"
Bed Way Width 22"
Center Distance 120"
Spindle Hole 12-1/2"
Spindle Speeds 5 To 300 Rpm's
Spindle Nose A-20
Chuck Size With 12-1/2" Hole (2) 24" 4-Jaw New
Feeds Long. (40) .0025 To .0356 IPR
Feeds Cross (40) .0013 To .0178 IPR
Threads Inch (50) 1 To 28 T.P.I.
Threads Metric (41) 1 To 28 MM
Tail Stock Quill Diameter 3-1/2"
Tail Stock Quill Travel 11-13/16"
Tail Stock Taper # 6 Morse
Main Motor 20 Hp.
Weight 18,000 Lbs.
Machine Floor Space 184" L-R To 102" F-B
Machine Height 75"
Chip Pan Yes
Taper Attachment Yes
Thread Dial Yes
Push Button Controls Yes
Rapid Traverse Yes
Note: It will take about 45 days to go thru this machine. Headstock will be flushed and new oil and filter added, Apron , cross slide and compound removed and cleaned
new slight glasses installed. Taper attachment cleaned and freed up. Two new Gator 25" 4 Jaw chuck installed.
New Belts. Machine will be cleaned, painted and cycled after the above work is completed.
Condition: Good
Suggested Equipmen