Market Forge Sterilmatic STM-E Bench-model or Floor-model Autoclave Sterilizer

Dimensions (approx.):
26" x 16"H Chamber Volume: 85L (inside)
18.75"W x 31"D x 29"H (outside)
Electrical: 208/240 Volts, 50/60 Hz,

Product Description:
The Market Forge Sterilmatic STM-E sterilizes and dries any material normally processed by autoclaving.
A built-in control maintains the operating temperature at a preset level up to 121°C (250°F).
Timed sterilization (0-60 min.) starts after operating temperature is reached.
The 103kPa (15psi) operating pressure is reached in a few minutes.
Door is self-sealing and cannot be opened until steam pressure is completely exhausted.
Exhaust selector may be set for liquids, instruments, or soft goods.
Sterilizers feature a 0-207kPa (0-30psi) pressure gauge, temperature gauge, low water cut-off, safety valve, thermostatic steam trap, and signal light.
Stand is available at additional cost.
Required connections: drain, 13mm (1/2") FPT or 16mm (5/8") O.D.; copper steam exhaust connection, 10mm (3/8") IPS.
All models available for operation on single- or three-phase, three- or four-wire system.
UL listed and CSA certified. 84 liters volume (3 cu ft).
Must be hardwired in the location of use