Makor Start-One

Used Reciprocating Spray Machine
Advantages offered by the START-ONE: higher production, paint savings,
uniform coating, higher and more consistent quality.

PAPER SYSTEM:
A paper transport system contributes to a virtually self-cleaning machine and significantly reduces maintenance costs
The unrolling system at the entrance and the rewinding device at the exit are designed
to maintain constant tension of the paper, avoiding breakage even when it is soaked by the paint
Load/unload of take-up roll is easy due to lateral removal via wheeled trolley
Rewind station includes a self-adjusting system to maintain a consistently flat paper belt transport
(preventing overspray on back side of workpiece)


SPRAY GROUP:
Spray system is composed of one oscillating arm with an electronically controlled drive
to ensure smooth movement, providing a consistent application across entire working width
Entire oscillating group is connected to the frame of the machine through pads
which guarantee the absolute absence of vibrations, resulting in perfect paint quality on the workpieces
Spray guns are attached to the oscillating arm using a quick-change gun holding plate
with quick disconnects to enable fast replacement of spray guns or for switching between coating circuits

Four (4) guns can be connected to one of the two (2) paint circuits
Three (3) high pressure circuits with recycle for coatings
One (1) high pressure circuit (without return) for solvent
Coating circuits have return hoses for quickly washing the circuit and for the recirculation of paint
Two (2) gun holding plates with quick disconnection system to allow fast replacing of the spraying unit

VENTILATION SYSTEM:
Spray booth design ensures proper control of air flows, avoiding the dispersion of the overspray to the environment
Standard supply provides one (1) gun holding plate with quick disconnection system to allow fast replacing of the spraying unit
Exhaust fan can be adjusted separately to ensure maximum filter efficiency

CONTROL SYSTEM:
Machine is managed by a PLC with a special user interface, that displays and manages in an intuitive way all functions and working parameters
An electronic reading bar automatically detects workpiece dimensions as they enter the machine
to control the spray gun activation (optimize consumption of paint)

OPTIONS INCLUDED:
Rapid (manual) coating change-over system enables the operator to cease operation on active circuit,
flush guns with solvent, activate the next circuit and then purge first
circuit while machine is already in operation on the second circuit
Three (3) high pressure coating circuits with recycle (closed-loop)
One (1) high pressure circuit for solvent
One (1) 5-way manual valve for active circuit selection

BOOTH PRESSURIZATION UNIT:
Pressurization unit complete with two (2) intake fans and removable filters to pressurize the spray booth
Spare Quick Change High Pressure Gun Holding Plate
One (1) spare high-pressure gun holding plate (two (2) total)
Includes (8) Kremlin AVX auto guns, (2) Kremlin 20:50 wall mount pumps complete, and (2) Kremlin fluid regulators
Also includes (3) spare paper feed rolls

PRODUCT DIMENSIONS:
Length: maximum n/a, minimum 12"
Width: maximum 51", minimum 1"
Height: maximum 2-3/8", minimum 3/16"

TECHNICAL SPECIFICATIONS:
Overall dimensions: 149" X 100" X 141"
Feed speed: 3.3 to 14.75 FPM
Feed motor power: 1 HP
Reciprocator motor power: 2.5 HP
Pressurization fan motor: 4 HP
Exhaust air fan motor power: 4 Skw
Operating voltage: 480V 3-phase
Exhaust air volume: 10,000 m3/hr (5,885 CFM)
Air make up required: 10,000 m3/hr (5,885 CFM)
Compressed air: 6 bar (90 psi)
Consumption/ volume: 1,650 nl/hr (58.3 CFM)
Voltage supplied must not fluctuate in excess of +/- 5 percent of its stated value.