Luwa Dust separator DS

Dust separator DS
Machine to separate very fine dust
Air flow rate 600 – 1800 m3/h
Max waste discharge output 15 kg/h
Nominal Pressure  loss 500 - 1500 Pa

Application
The dust separator is primarily used for the collection of filter waste (e.g. APF, LDF). The discharge to be collected can also be loaded with a relatively high fiber volume. It can also be used as final discharge stage for a single or central waste disposal unit for filter dust. The loading of the dust separator can be performed continually as well as intermittently.
Mode off operation
The filters, control and pneumatic control are delivered separately. Due to the cyclone type design of the dust
separator an efficient discharge of large and medium textile fibers and fragments is performed by centrifugal air rotation. The textile fibers and fragments concentrate on the external wall of the cylinder, drop down into the cone and leave the dust separator. Fine dust particles accumulate on the external side of the bellow filters, while the filtered exhaust air ascends in the filter inner tube and leaves the dust separator via the outlets in the cap. The developing filter dust cake at the bellow filters is cleaned by interval type pulses of compressed air inside the filter tubes.