Langguth 206 L-210, Wet glue labeling machine
EUROPE (Western and Northern)
Linear runner for applying sign or wrap-around labels (wet glue) to cylindrical containers.
Perfomance:
Approx. 25-100 labels/min freely adjustable via frequency converter
Design type:
Left-hand machine (the direction of overlap
of the all-round labels depends on this)
Gluing:
210 mm brass glue roller with quick-change device with one pitch
from 19 to 3 mm (horizontal strip gluing on the entire length of the label)
Label magazine:
Up to 3,500 labels with a length of 80-380mm
Working height of the conveyor belt:
1,000mm, adjustable +-50mm
Carrier:
80.5mm chain, length approx. 3m/ with single snail
Glue supply:
Pleumatic glue pump with heating
Painting:
light gray Ral 7042, unless stainless steel
Electrical equipment according to VDE regulations: 400 volts,
3 phases, 50 Hz, control voltage 24
Volt / PLC Siemens
Protection class: IP-54
Connected load: approx. 0.7 kW
Net weight: approx. 500kg
Dimensions: approx. L 3,100 mm x W 1,000 mm x H 1,900 mm.
including pump, a single-cycle screw, a rolling conveyor
completely finished with format parts/glue pump
with heating and retracted to a maximum of 2 containers
The machine is or is completely overhauled. Every bearing was swapped and every
Wear part changed and/or readjusted.
In addition, the entire machine is being repainted and adjusted.
The machine is easy to use and clean.
It can run for well over 20 years.