Lange B 70 K

Edge banding machine
Used machine
Condition: very well maintained as little used

Furnishing:
Machine table with 13 rollers for better workpiece guidance
Edge feeding, in synchronization with the belt feed
Edge thickness adjustable via digital counter
pneumatic roll separation with knife (for edges that can be cut)
three pressure rollers
Belt feed 0.25 kW; approx. 1250 mm long; approx. 6.0m/min; 50mm wide timing belt with thick, workpiece-friendly rubber pad.
Digital counter for height adjustment
Direct glue application to the workpiece: Leak-proof glue basin
with glue supply from below and quick heat-up time after machine shutdown
Flush trimming unit for the front and rear edges of the workpiece, automatic scanning
on the workpiece, pneumatic trimming with knife for edges that can be cut
Flush milling unit with vertical scanning and horizontal guidance, reproducible adjustment using digital counters
2 powerful 0.4 kW high-frequency motors, continuously adjustable from 4000 to 18000 rpm
milling cutter Ø 70mm, Z4, radius 2mm/15
central extraction port Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm,
Automatic height adjustment of the upper cutter with the belt feed
Workpiece support approx. 1800 mm long throughout, workpiece support rail, extendable to approx. 300 mm
Rotatable foil plate Ø 800mm

Technical details:
Workpiece width min. approx. 80 mm
Workpiece thickness 10 50 mm
Workpiece length min. approx. 220 mm
Edge thickness 0.4 2.0 mm
Roll separation max. 1.0 x 55 mm, 2 x 45 mm
Glue basin heating output 2.7 kW
Electrical connection 400V, 50 Hz, 3Ph + N
Total connection 3.8 kW
Heating time approx. 10 mins
Pneumatic connection 6 bar
Working height approx. 880 mm
Dimensions approx. 1800 x 700 x 1300 mm without foil plate Ø 800
Net weight approx. 260 kg