Laem System VIS100-800 800mm

Doctoring Machine
Working width: 800mm
Materials: APET/PE materials, thickness range to be considered is 50–600µm
Speed: 600m/min
Maximum diameter reel unwind: 800mm
Rewind: centre driven with independent arms
Maximum diameter reel rewind: 1000mm

VIS is designed to correct alignment errors and to remove defective spans from finished reels of APET sheet
Machine is bidirectional, allowing the web to run through the machine in either direction
During first passage from right to left, the web is checked
by the operator and if necessary the defective spans are eliminated with help of splicing table
Once the reel has been cleaned and rewound, it can be unloaded,
or if necessary, processed again from left to right, especially if the material is printed

Splicing table is located in a comfortable ergonomic position and it is designed to facilitate the splice, top and bottom of rigid materials
Unwind and rewind tension range: 25-250N
Maximum outer diameter unwind/rewind:1000mm
Taper tension: from 100% to 50% of the set tension
Web direction: Bidirectional
Electric power supply, drive: CA400v, 50hz
Electronic power supply, service voltage:12kw
Electronic components: Siemens
Minimum pressure of compressed air supply: 6 bar
Consumption of compressed air, humidity free: 70l/hr
Noise level: Lpa, 80dba
Rewind parameters
Maximum jumbo roll width: 800mm
Width of rollers/draw roller: 900mm
Maximum jumbo roll diameter: 1000mm
Unwind and rewind shafts: 2 x 3”, 2 x 6”
Maximum jumbo roll weight: 800kg
Type of cores: good quality cardboard
Web guide stroke : ± 50mm
Rewind: central drive, with rubberized lay on roller across the full nominal width