Kundig BOTOP-4-1600-RK-RK

1st Unit - Contact roller “R”
High precision rubber screw pin roller.
Rubber hardness: 80 ° Shore.
Contact roller diameter: ∅ 180 mm.
Idler roller diameter: ∅ 140 mm.
Motor: 22 kW, 400 V / 50 Hz.
Sanding belt speed: 20 m / s.
Pneumatic lowering / raising of the unit according to the grit scale to compensate for the thickness of the abrasive belt after selecting the appropriate operation and the grain size on the Touch Screen monitor.
Strong locking device of the contact roller on the side of the belt entry.
Pneumatic control of belt tension, oscillation.
Optimized suction system inside the machine for fast and high-quality removal of sanding products.
2nd Unit. COMBINED “K”
High precision rubber screw pin roller.
Hardness 45 ° Shore.
Contact roller diameter: ∅ 180 mm (7 ").
Pneumatic lifting / lowering of the Contact Roller according to the selected grinding operation on the Touch Screen Monitor.
Pneumatic lowering / raising of the Contact Roller according to the abrasive belt thickness compensation scale selected for the job and set for ideal job.
Air cushion with high-precision adjustment of the pressing force, to adjust the extra soft sanding for excellent surface quality.
Tension roller: ∅ 140 mm.
Motor: 18.5 kW, 400 V / 50 Hz.
Abrasive belt speed: 15 m / s.
Strong locking device of the contact roller on the side of the belt entry.
Pneumatic control of belt tension, oscillation.
Optimized suction system inside the machine for fast and high-quality removal of sanding products.

1st Unit LOWER:
Contact roller. Same as 1st unit from above.

2nd unit LOWER:
Combined unit. Same as 2nd unit on top.

The main characteristics of the machine:
Voltage EUROPE 400 V / 50 Hz
Belt size: 1620 mm x 2000 mm
Working width: 1580 mm
Maximum thickness: 200 mm
Minimum thickness: 4 mm
Max / Min length: not limited / 500 mm
Belt change side: left (towards the conveyor)
Control panel: left (in the direction of the conveyor)