Kronen GS 10 Belt Slicer

Prior to processing, the right knife for the product is installed;
no tools are required for this purpose.
The cutting thickness is infinitely adjustable from 0.5 to 50 mm.
The hold-down pressure and the knife
and belt speed are then set.
The product is prepared for cutting, e.g. cored,
peeled or segmented, before being placed
on the 125 mm-wide infeed belt depending
on the cut intended.
Next, it is cut precisely and gently thanks
to precise hold-down technology
and product guidance. As standard,
the cut product can be ejected underneath
the knife box, for example into a spin basket
or a Euro crate. It can be optionally conveyed
via a discharge belt for further processing,
for example when the GS 10-2 is integrated
into a processing line.