Komfi Delta 52 Laminating

The DELTA laminating machine features a compact design, suitable for lamination in both digital printing and offset printing, with a maximum format of B2.
Automatic paper feeding via vacuum suction cups, paper guides for tightening thin sheets before lamination,
a sensor that detects misaligned sheets to prevent foil adhesion on the rollers, and foil unwinding with side adjustment and a mechanical brake.
Laminating roller heated in three zones for perfectly controlled temperature; overlap can be electronically adjusted even during the lamination process.
Wide parameter control via a touchscreen display and pneumatically adjustable roller pressure on both sides.
Adjustable tension and alignment of laminated sheets allow for easy separation—tearing using rollers with different speeds.
A perforator is positioned behind the pull rollers.
Foil holder with pneumatic expansion blades and fine adjustment for easier foil centering.
START/STOP and PAUSE function—possibility to stop the lamination process between sheets and resume it without wasting sheets.
Polyurethane pressure roller.
Specially developed paper overlap system ensuring a maximum accuracy of ±1 mm.
This model has been developed to provide sufficient speed with minimal time required for changing paper or foil formats—meeting typical demands in digital printing.
Automatic Feeder DELTA 52
Max. lamination speed Up to 35 m/min
Min. paper size 20 x 20 cm
Max. paper size 54 x 80 cm
Paper weight 115 – 600 g, sheet stack height up to 70 cm
Sheet overlap ±1 mm
Machine dimensions (L x W x H) 268 x 123 x 144 cm
Lamination foil thickness 24 – 50 microns
Foil types OPP, PET, NYLON
Power supply 7.2 kVA, 3 x NPE 400 V AC, 50 Hz
Air pressure 6 bar, 130 l/min
Pressure between laminating rollers 22.5 kN