Koehler K21410/K21420 (SV3000) Saybolt Viscosity Bath

Dimensions (approx.): Bath: 12" depth (inside)
Electrical: specify: 115 or 220 Volts, 50/60 Hz, 12.3A/6.4A

Product Description :
The Koehler K21410 SV3000 (K21410) saybolt viscosity bath is a constant temperature bath and is used to determine the time required for 60mL of sample to flow through a calibrated orifice under precisely controlled conditions.
Saybolt Universal Seconds (SUS) is the standard measurement for lubricants, insulating oils, and lighter fuel grades, and Saybolt Furol Seconds (SFS) is used for heavier oils and bitumens.
Insulated bath interior is constructed entirely of heavy gauge stainless steel.
A built-in overflow pipe and drain valve simplifies filling of the bath fluid to the proper level.
Chemical resistant top plate provides excellent insulation and is easily removed to allow for cleaning of the bath interior.
A cooling coil for tap water or refrigerated coolant is provided for operation at near-ambient temperatures.
Steel cabinet has leveling feet and a chemical-resistant polyurethane-epoxy finish.
Microprocessor PID circuitry assures precise temperature control within ASTM specified tolerances throughout the operating range of the bath.
Simple push-button controls and dual digital displays permit easy setting and monitoring of bath temperature.
Two place calibration offset is provided.
Accommodates four viscometers and four 60mL receiving flasks.
Sliding draft shields and a chemical-resistant alignment plate facilitate handling of the flasks, and glare-free fluorescent backlighting is provided for easy viewing of the samples.
Communications software (RS232, etc.) ramp-to-set, and other enhanced features are available at additional cost.

Features and Benefits :
- Microprocessor control of temperature between ambient and 240C (464F)
- Four tube capacity
- Dual digital displays show setpoint and actual temperature
- Selectable temperature scale - Fahrenheit or Celsius
- Bath Capacity: 5 gal (19L)
- Conforms to ASTM D88, D244, E102, AASHTO T72; FTM 791-304 and related specifications

Included Accessories:
Thermometer Supports (4)
Oil Strainer
Tube Nut Wrench
Port Closures (2)
Cleaning Plunger
Chained Corks (4)
Withdrawal Tube
Orifice Wrench
Port Covers (4)