Kasel BH-20 Slice-N-Tact Slicer

The Slice-N-Tact Slicer is a ram feed slicer that pushes product through a reciprocating set of evenly spaced knife blades. The ram speed is determined by regulated air pressure. Adjustable product hold downs on both the in-feed and exit of the blades. The slice thickness is changed by either removing blades or changing the harp set. Below are the unit specifications:

Voltage: 460v, 3-Phase
Pneumatic Requirement: 71 PSI
Slice Thickness: 1.5MM (min) - 20" (max)
Slice Capacity: 7,000 lbs. / Hr
Maximum Product Size: 19 3/4" x 16" x 6 1/2"

The Slice-N-Tact Slicer is available and in good working condition. It has been stored in a temperature controlled area, and was in working condition when pulled from service. The unit was put in storage because of a production line change.