Kalamazoo KPS FA 820 Orbital Wrapper

This fully automatic stretch system has
a 20” max effective width.
It comes with 6’ belted conveyors.
It can handle 1,000 lb products.
Sequence of operation
This fully automatic system is loaded on
an inbound conveyor by an operator.
• The system will automatically convey the
load into the wrap cell.
• System will automatically attach film,
run the wrap cycle providing as many pre-determined
wraps as necessary, and cut the film after
load has passed through the cell.
• After conveying to the end, the operator will
pick up the load off the end of the outbound
conveyor.
Footprint
• 74” wide X 152” long
Construction
This system will be made from powder coated structural
steel tube, and the plate and bar used
meets ASTM-A36 or ASTM-A500 qualifications.
Controls
Allen Bradley Controls for consistent performance including PLC controls all wrap functions & AC
drives.
PLC—Allen Bradley Micro 850
Drives - 3 ea AB powerflex 525
Power supply — AB 1606X1B
Onboard interlock
Valve—SMC
Motors—1 ea 2 HP Baldor Motor
2 ea 1 HP Baldor Motor
Conveyors—2 ea 37” TOR height (adjustable), 19” W Ruff top belt, 61 1/2” long
Capacity
Each model will be able to wrap 30 loads per hour depending on how long the prep stage takes,
centering the load, etc. System can run 30 RPM safely.
This unit was built by Kalamazoo as a show room model.
It was only operated to demonstrate the
capabilities of the orbital stretch wrapper.