Italpresse XL8 32-16 PMBO

Hydraulic Hot Press
HEATING PLATENS:
Platen dimensions: 3200×1600 mm (126’’x63’’)
Heated platens: 2
Openings: 1
Opening daylight: 400 mm (15.7’’)
Platen thickness: 37 mm nominal (1.45”)
Type of heating platens: Solid steel drilled platens
The heating platens are obtained from solid steel plates, specially rolled, finely milled on the surfaces and sides on a CNC heavy milling machine.
Deep channels for the heating oil are gun drilled with diameters appropriate to the thermal and dimensional characteristics of the press
Boring done by a constant pitch, with automatic feeding, to ensure a perfect smoothness of the channels for the efficient circulation of the heating fluid.
This grants a highly uniform distribution of the temperature all over the platens.
The working surface of both platens is covered with a high mechanical and thermal resistance anti-sticking belt

HEATING SYSTEM:
Heating fluid Thermal oil
Heating system Electric Boiler
Max platen temperature 120 °C
Heating power 27 kW
Special pump, plant and valves for high temperature oil
Electric boiler mounted on the press frame
Safety thermostat

HYDRAULIC CYLINDERS:
Maximum thrust: 160 ton
Thrust cylinders: 8
Thrust piston diameter: 85 mm (3.3’’)
Cylinder stroke: 400 mm (15.7’’)
Press cylinders made of special seamless tubes of thick steel.
Welding done by a robot machine to control all welding parameters.
CNC machining allows minimum tolerance for precision movement and long life of the seals.
Pistons are machined out of a steel rod, CNC ground, polished and thickness chromed.

HYDRAULIC SYSTEM:
Compact hydraulic power unit made in Germany (make: HAWE)
Dual pump for high flow-low pressure and low flow-high pressure steps
Automatic re-set of hydraulic pressure
3 kW Hydraulic power
Up-stroking movement of bottom platen