Intest, Temptronic Thermostream ECO-810-M-4

Intest Temptronic Thermostream ECO-810-M-4
Temperature Forcing System -80°C to +225°C.
The InTest ThermoStream ECO-810-M
Temperature Forcing Device is a silent, 20 A/60 Hz forcing system that can go
from -55° to 125° C in about 10 seconds.
The ThermoStream does not require yearly leak testing because the
device's gas charge stays below the EU 517/2014-specified CO2 equivalent cap for
greenhouse gas emissions. Thanks to WhisperStream technology,
these temperature forcing devices also automatically lower their
power consumption when they are not in use and make only 56 dBA of noise.
The InTest ThermoStream measures a model's resistance to high heat, cold,
and humidity. The InTest ThermoStream ECO-810-M has several capabilities,
including semiconductor testing, failure analysis, and device characterization.
The ThermoStream also has a wider range of applications in PCB and
electronic sub-assembly testing. The InTest Thermostream systems offer
two temperature outputs for control, measured at the thermal head or
directly at the DUT, and remote connections via IEEE 488 and RS-232.
Thermostream is made for quick and accurate thermal conditioning of
printed circuit boards, hybrids, modules, subassemblies, and components. 208V,
1Ph, 60Hz, 20A

Temperature range -80° to +225ºC (60 Hz Performance)
No LN2 or LCO2 Required
Transition rate -55 to +125°C, approx. 10 seconds or less
125 to -55°C, approx. 10 seconds or less
System airflow output* 4 to 18scfm (1.9 to 8.5 l/s) Continuous
Refrigerants HCFC and CFC-free, non-toxic, non-flammable
Serviceability Auto-diagnostics and field replaceable modules
Over temperature protection Settable high and low air temperature limits
(factory set at +230°C)
Compliance CE, RoHS, EU 517/2014 (
Power 200 - 250 VAC, 60Hz, 20 amp, 1phase
Compressed air Clean Dry Air (CDA) w/ 5 micron particulate contamination.
Oil Content:
Air supply pressure Dewpoint:6.2 to 7.6 BAR (90 to 110 PSIG)